One new arrival is an unusual Pliomera trilobite from the Huk Formation near Oslo Norway. These Ordovician trilobites are typically known from Russia but the material from Norway has a dark black shell. It also is found in MUCH harder limestone so the preparation is more intensive and time consuming. Below is a preparation sequence for the trilobite using airscribes and finally air abrasives to remove some final matrix from in between the segments. This trilobite can be found for sale here.
This was just too awesome not to share. At my wedding reception that past weekend I got quite a surprise from my new wife, a trilobite "grooms cake". It was done by Mike's Amazing Cakes and the detail was just amazing. I was always thought trilobites likely would have tasted something like lobster, but I learned they taste like caramel and chocolate.
On nearly every social network I participate in a photo a Megalodon tooth purportedly stuck in whale vertebra has been going viral. Typically it has the title, "The most baddass fossil in existance". I've had it forwarded onto me several times already.
Unfortunately it's a fabrication. The Megalodon tooth is real, as is the fossil whale vertebra but the tooth has been artificially mounted in it to create a display. Neverless it's still a cool coversation piece. You can find similar displays available for sale a few places and they are typically honest with the description. There are a few issues with the display from the stand point of reality.
Outside of “I have some fossils do you want to buy them?” and “I found this rock that I’m sure is a dinosaur tooth/claw, can you ID it?” the most common question I’ve gotten recently through the contact form on FossilEra.com is “Do you have dinosaur eggs for sale?” I seem to get this question at least once a week, and already been asked this three times time week. There must have been a reality show featuring dinosaur eggs or something recently.
The short answer is. No, we don’t have any dinosaur eggs for sale and are very unlikely to in the future. The longer explanation is this…
Last August I had the exciting opportunity not only to make my first trilobite collecting trip to New York, but to collect the famous Walcott-Rust Quarry. The Walcott-Rust Quarry (WRQ) was discovered in 1870 by a 20 year old Charles Doolittle Walcott. Yes, the same Charles Walcott went go on to become the head of the US Geological Survey and discover many other famous sites including the Burgess Shale. Along with William Rust he commercially collected the quarry for several years selling specimens to both tourists and major institutions.
WRQ has an exceptionally preserved trilobite fauna of at least 18 different species of trilobites along with diverse echinoderms, brachiopods and bryozoans. Many of the trilobites found within the limestone layers are preserved perfectly 3 dimensional with no compactions at all, so they look like they are ready to crawl off of the rock. One layer has even yielded specimens of Ceraurus, Flexicalymene and Meadowtownella with preserved appendages.
U-Dig (www.U-DigFossils.com) is a private, fee-dig trilobite quarry near Delta, Utah. It contains one of the most prolific trilobite assemblages in the world. I dug my first trilobite there more than 15 years ago, and countless others have been introduced to the world of fossil collecting at U-Dig. It’s a great place for pretty much anybody to find their own fossils including families, kids and people who’ve never collected a fossil. For a hourly fee, they supply tools helpful guidance, unlimited rock to split and you get to keep everything you find.
For the previous week I had been in search of rare trilobites in the deserts of Utah and Nevada. The process involved days of moving heavy overburden and cracking hard limestone with a sledgehammer. I had been going on three or four days straight of not finding a decent complete trilobite, so not only was my body feeling a bit worn out, but I was getting pretty frustrated. I decided that take a day off and “rest” by visiting U-Dig to split some nice soft shale. Plus, I was basically guaranteed to find some complete trilobites even if they were just common species.
A shipment of large Moroccan crinoids of the species Scyphocrinites elegans just arrived yesterday. The highly detailed crinoids are Upper Silurian in age (420 million years old) and are mined near Boutschrafin, Erfoud, Morocco. To reach the crinoid layer the workers must dig deep vertical shafts, sometimes 30 feet in depth. They then tunnel horizontally along this layer to extract plates of crinoids. These plates must then be brought up to the surface in small pieces using a bucket where they prepared. One can only imagine that is back-breaking, hot and dangerous work.
The crinoids plates are then reassembed on the surface, and typically prepared using chemical methods. Below are photos of the preparation. I'm not totally sure but I believe the chemical being used is Potassium hydroxide. It's a very strong base (opposite of acid) and will disolve the surrounding rock without damaging the crinoids fossils which are calcite based. This is actually a very tedius process that takes weeks to complete. Small bits of solid potassium hydroxide must be applied and left to disolve before more can be applied. It has to be done carefully so no too much rock is removed causing the fossil to fall apart.
Side by side in the photo below is a very large Megalodon Tooth at just over 6 inches long and a replica of a near record size Great White tooth at 2 1/2 inches long.
The largest known Megalodon tooth is about 7 3/8 inches in length. There have only been a handful EVER found exceeding 7 inches. The largest confirmed great white shark teeth are less than 3 inches long. As you can see there really isn't much of a comparison, it would be hard to confuse the two.
I was going through some old photos and I found a detailed preparation sequence of a spiny Olenoides nevadensis trilobite from the Wheeler Shales of Utah. I prepared this specimen for my own collection years ago, but I thought it would be interesting to shale. Like most trilobites from the site it was found splitting shale with some of the shell on the negative and some on the positive. This requires both halves to be glued back to together and then the matrix (rock) removed from the top. It took about 15 hours of work in total to microscopically prepare this exceptional specimen using air scribes and air abrasives.
I get the chance to head out in the field pretty frequently to collect fossils myself. Before starting FossilEra I would take maybe three or four collecting trips a year, but now the job gives me a good excuse to do it a little more frequently. I thought it would be fun to chronical some of my collecting trips on this blog to give people an idea of the type of work that goes into finding specimens like some of those being sold on this site.
Last April I got an invite from Dan Cooper (a true legend in the trilobite world) to join him and a group of about a dozen other trilophiles down on his lease in the Haragan Formation of Oklahoma. The Devonian aged Haragan Formation, produces arguably the most beautiful and highly detailed trilobites in the United States. It has been famously collected by Bob Caroll for over 3 decades at “Black Cat Mountain”. Dan’s lease was basically one hill over from Bob’s lease at Black Cat Mountain. See Oklahoma trilobites for sale on FossilEra, many collected and prepared by Bob.
I have gotten several times lately from customers wondering about the pricing on Megalodon teeth. Why is that 6 inch tooth less than the 5 1/2 inch tooth that you are selling? Shouldn’t it be more expensive?
Fossils are all unique, so of course pricing is a little subjective but there are many factors that go into putting a price on a Megalodon tooth. View Megalodon teeth for sale on FossilEra. Some of the factors that include size, overall condition, location, does it have restoration, etc.
On the way back from my recent trilobite collecting trip down in Utah and Nevada I had the opportunity to stop by a large petrified wood importer/wholesaler. I was blown away not just by the diversity and quantity of the petrified wood he had for sale, but also the quality of the polishing which he was doing. The majority of petrified wood I've seen has been poorly polished with scuff marks and dull spots visiable, but this material was fantastic. With higher quality petried wood the manual labor and materials that go into getting a great polish typically represents much more of the overall cost than the raw materials themselves.
Like a kid in a candy store I was able to go through stacks of material and pick out a varied selection to purchase for sale here on FossilEra. I acquired material in many forms and from many locations around the world including Oregon, Wyoming, Madagascar, Zimbabwe, etc. Yesterday I spend much of the day photographing these new acquisitions, writing the listings and they are now offered for sale on this site.
Below is an example preparation sequence of a large (2 3/4 inch) Utaspis marjumensis trilobite from the Marjum Formation of Utah. It was personally collected in the spring of 2013 from a lease in the House Range. This shows how much skilled work goes into a quality fossil even after it has been found. Click on the images for larger versions.