Utaspis Trilobite Preparation Sequence

Below is an example preparation sequence of a large (2 3/4 inch) Utaspis marjumensis trilobite from the Marjum Formation of Utah. It was personally collected in the spring of 2013 from a private lease in the House Range. This shows how much skilled work goes into a quality fossil even after it has been found. Click on the images for larger versions. View Utaspis For Sale

_blank
Quarrying the interbedded limestone and shale layers of the Marjum Formation. Complete Utaspis with cheeks are pretty scarce.
_blank
The two halves of the split trilobite have been glued back together and the head is partially exposed after an hour of work using air abrasives under microscope.
_blank
About 7 hours in. It's possibly the most frustrating trilobite I've ever prepped. I've been ready to chuck it across the room several times. The shell is tissue paper thin, and even using dolomite at 15 PSI causes it to start to flake up. I have to stop every 30 seconds to try and stabilize it with glue. It's nerve racking as I think if I hit it at the wrong angle half the shell will just flake off and I'll loose a spectacular specimen.
_blank
12 hours of work into the Utaspis and it's almost fully exposed.


_blank
About 14 hours in and getting closer to completion. Just needs more matrix cleanup work, and restoration of some damaged shell.
_blank
Completed Utaspis post shell restoration and matrix cleanup. This one is going in the personal collection.